Air Inlet Temperature Sensor Kit AEM 30-2010 

Air Inlet Temperature (AIT) Sensor Kit. 3/8"NPT. Includes: Air Temp Sensor, 3/8"NPT Aluminum Bung & Flying Lead Connector.

All AEM Sensors include a flying lead with a weather-tight seal and 12 inch insulated wires This is important since the correct connector will give you the most accurate voltage possible.

Sensor Performance Specifications: 

Accuracy: < 1.5°C / 2.7°F

Operating Temp: -40C to 135C / -40F to 275F

Resistive Range (Ω): See Table 

Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil 

Sensor Body Material: Brass 

Thread: 3/8"-18 NPT

Hex Size: 3/4" 

Installation Torque: 20Nm / 15 ft-lbs

Weight: 33.3g

Supply Current: 5Vdc

Elec. Termination: Weatherproof connector. Includes mating Connector with Flying Leads 

http://www.aemelectronics.com/
Designed by Racers, for Racers
At AEM, we live and breathe motorsports. In fact, it’s this involvement in both professional and amateur racing that gives us the inspiration for the products that we design and produce. Many of our key staff in engineering, sales, marketing and tech support participate in some form of racing. We compete in Off-Road Racing, Road Racing, Bonneville, Drag, Drift, Bikes…if it has wheels we are either competing in the sport or have a very deep involvement in it. From this involvement we gain information to create and improve our products.