Boost Control Solenoid Kit AEM 30-2400

Boost control solenoid kit with 1/8-NPT. Includes -4 adaptors, barb adaptors, connector plug with flying lead & solenoid.

The model 30-2400 Boost Control Solenoid is specially modified for use as a boost control solenoid in high boost automotive systems. The kit includes all the necessary fittings to plumb your wastegate for either an internal or external wastegate.

The 30-2400 Kit Contains:

 1x Fast Response Solenoid

1x Mating Connector Assembly

 1x 1/8” NPT Sintered Muffler

2x 1/8” NPT to 3/16” Hose Barb Adapters

Operating Voltage:  12VDC

Operating Frequency:  31hz

Duty Range:  10 to 90%

Max Pressure:  120 PSI

Electrical Connection:  Polarity is unimportant. Hook one wire to switched 12 Volts and the other to the AEM EMS’s PW2 output or the driving devices boost control line. NOTE: on the SRT4 EMS 30-1510 PW2 outputs +12V.  Hook up one wire to PW2 and one wire to ground.   If you are not sure please refer to your EMS instructions/pin out sheet and verified the polarity output on PW2.  When energized, ports 1 & 2 are connected, when de-energized, ports 2 & 3 are connected. The port  numbers are clearly noted on the solenoid body.

http://www.aemelectronics.com/
Designed by Racers, for Racers
At AEM, we live and breathe motorsports. In fact, it’s this involvement in both professional and amateur racing that gives us the inspiration for the products that we design and produce. Many of our key staff in engineering, sales, marketing and tech support participate in some form of racing. We compete in Off-Road Racing, Road Racing, Bonneville, Drag, Drift, Bikes…if it has wheels we are either competing in the sport or have a very deep involvement in it. From this involvement we gain information to create and improve our products.